After running the factory open front diff on some of the toughest trails in Northern California (Fordyce, Rubicon, and many others), locking the front diff became a necessity. Obstacles like Soup Bowl and the winch hills on Fordyce have proven to be pretty tricky without a locked front differential. There has even been some radom spots where you don't really expect to use a front locker but it's very nice to have.
Because the LC250 comes factory with a rear electric locker, it only made sense to go electric in the front and Im glad we ended up going with Eaton.
We got the Eaton front E-locker installed on the 250 last year and have tested this locker through many obstacles including Soup Bowl on the Rubicon and many other challenging obstacles throughout Northern California. The locker has performed flawlessly and just works as it should.
Here are a few reasons why we installed Eaton and why we continue to install Eatons on new gens like the 250 Land Cruiser, 6G 4Runner and 4G Tacoma. Also Eaton was the first to actually offer a front locker option for the LC250.
Ease of wiring.
Eaton makes it super easy to wire directly into my SwitchPros, which is a huge advantage over other options. Fast and smooth engagement and disengagement! The Eaton engagement is smooth and almost instant! You push the button and get instant traction.
The name.
Eaton has been around for a long time, so when it came time to add the front locker, the choice was honestly an easy one.
Simplicity and reliability.
No seals, airlines, etc. to worry about. Just a couple wires and fewer failure points.
Capability.
We at Dissent Offroad like to push our vehicles hard and quickly found our limits on the factory open front diff. We had run trails like Rubicon and Fordyce on the open front diff, and there were definitely some obstacles that were a struggle. Those same obstacles, after the Eaton locker was installed, were conquered with ease.
Control.
The new Toyota vehicles come with a pretty advanced traction control system; this system works really well, but it can be a bit delayed and harsh in low traction situations. This system requires a wheel to spin, then applies the brake to that wheel, which transfers the power to the wheel with traction. While this will typically keep you rolling, the sudden torque transfer to the wheel with traction can bind and cause differential or CV failure. With the locker engaged, you get constant 50/50 power to each wheel, which allows much smoother control over wheel spin, thus minimizing the chance of a failure.
Here are a few shots over the last year of wheeling the 250 Land Cruiser. If you have any questions, let us know.
As a Toyota Land Cruiser (80, 100, 200, 250) and Lexus GX, 700H specialty off-road shop, it's important to put parts on these vehicles we trust, and we trust Eaton as one of our go-to E-Locker options for some of these platforms. We're quickly becoming the go-to new gen Lexus Off-road Specialist (GX550+LX700h/600) throughout the USA. We also specialize in 74W Portal Axle installations. We have installed more portals on Lexus vehicles than any other off-road shop in the nation and we're also the only one that can fully outfit LX700h with multiple product choices. Some of the other platforms we focus on include LC200, LC250, 6th Gen 4Runner, 3rd Gen Tundra, and 4th Gen Tacoma. If you have any questions about building your 250 Land Cruiser or Lexus, give us a call anytime.
You can see a few of our builds here: https://dissentoffroad.com/blogs/news
And our build services here: https://dissentoffroad.com/pages/build-services
Because the LC250 comes factory with a rear electric locker, it only made sense to go electric in the front and Im glad we ended up going with Eaton.
We got the Eaton front E-locker installed on the 250 last year and have tested this locker through many obstacles including Soup Bowl on the Rubicon and many other challenging obstacles throughout Northern California. The locker has performed flawlessly and just works as it should.
Here are a few reasons why we installed Eaton and why we continue to install Eatons on new gens like the 250 Land Cruiser, 6G 4Runner and 4G Tacoma. Also Eaton was the first to actually offer a front locker option for the LC250.
Ease of wiring.
Eaton makes it super easy to wire directly into my SwitchPros, which is a huge advantage over other options. Fast and smooth engagement and disengagement! The Eaton engagement is smooth and almost instant! You push the button and get instant traction.
The name.
Eaton has been around for a long time, so when it came time to add the front locker, the choice was honestly an easy one.
Simplicity and reliability.
No seals, airlines, etc. to worry about. Just a couple wires and fewer failure points.
Capability.
We at Dissent Offroad like to push our vehicles hard and quickly found our limits on the factory open front diff. We had run trails like Rubicon and Fordyce on the open front diff, and there were definitely some obstacles that were a struggle. Those same obstacles, after the Eaton locker was installed, were conquered with ease.
Control.
The new Toyota vehicles come with a pretty advanced traction control system; this system works really well, but it can be a bit delayed and harsh in low traction situations. This system requires a wheel to spin, then applies the brake to that wheel, which transfers the power to the wheel with traction. While this will typically keep you rolling, the sudden torque transfer to the wheel with traction can bind and cause differential or CV failure. With the locker engaged, you get constant 50/50 power to each wheel, which allows much smoother control over wheel spin, thus minimizing the chance of a failure.
Here are a few shots over the last year of wheeling the 250 Land Cruiser. If you have any questions, let us know.
As a Toyota Land Cruiser (80, 100, 200, 250) and Lexus GX, 700H specialty off-road shop, it's important to put parts on these vehicles we trust, and we trust Eaton as one of our go-to E-Locker options for some of these platforms. We're quickly becoming the go-to new gen Lexus Off-road Specialist (GX550+LX700h/600) throughout the USA. We also specialize in 74W Portal Axle installations. We have installed more portals on Lexus vehicles than any other off-road shop in the nation and we're also the only one that can fully outfit LX700h with multiple product choices. Some of the other platforms we focus on include LC200, LC250, 6th Gen 4Runner, 3rd Gen Tundra, and 4th Gen Tacoma. If you have any questions about building your 250 Land Cruiser or Lexus, give us a call anytime.
You can see a few of our builds here: https://dissentoffroad.com/blogs/news
And our build services here: https://dissentoffroad.com/pages/build-services












