Black Rhino Wheels "AWOL" on the 250 Land Cruiser

@Kai__Larsen · 2025-04-03T05:59:35+00:00

While working on the LC250 I noticed something about the hitch that differs from my 5th Gen 4Runner. The LC250 has a welded hitch from the factory. VS the 4Runner has a bolt in hitch. The 4Runner's was easily removable to touch up with paint when it gets rusty or also remove to add/weld high clearance options. But now with the LC250 if anyone ever releases a high clearance hitch you'll need to cut the hitch off before you can weld it higher. Whereas the 4Runner can be unbolted in 5 mins before being cut and welded again higher up. I'm assuming the weld on the 250 hitch is to support a heavier load? Maybe it's just the way the frame works on these new models. Anyone know the answer? Hopefully we can start seeing some high clearance hitch options for the 250 platform similar to what Dissent Offroad has for the 4Runner.

@Kai__Larsen

Member

Mar 19, 2025

Just picked up the new wheels and tires for my LC250. These are the Black Rhino "AWOL" in a +25mm offset, 17" wheel, and the 6x139.7 bolt pattern in Silver with a Machined Finish. At $281 a piece they're not the cheapest or most expensive wheel. But I love the look of them with my black LC250. You can also order different center caps to go with this wheel to switch up the look. If anyone else has these in any color I'd love to see a picture of them on your rig below.